中部大学

中部大学

教員情報

池田 忠繁 IKEDA Tadashige

プロフィール

生年 1965
出身 愛知県
職名 教授
所属 工学部 宇宙航空理工学科
工学部 機械工学科
大学院 工学研究科 機械工学専攻
最終学歴 名古屋大学大学院工学研究科航空工学専攻博士後期課程満期退学
学位 博士(工学)(名古屋大学)
所属学会・役職 日本航空宇宙学会
日本機械学会
日本複合材料学会
米国航空宇宙学会
専門分野 宇宙航空機構造、スマート材料・構造システム
研究テーマ 形状記憶合金などスマート材料の変形挙動の定式化とその応用、ファイバープレイスメントによる多機能複合材料の創製
研究紹介PDF

著書および訳書

T. Ikeda, “One-Dimensional Phase Transformation Model and Its Application to Damping Enhancement Analysis,” Advances in Shape Memory Materials – In Commemoration of the Retirement of Professor Hisaaki Tobushi, Edited by Q. Sun, R. Matsui, K. Takeda, E. A. Pieczyska, ISBN 978-3-319-53305-6 (print), ISBN 978-3-319-53306-3 (eBook), Advanced Structured Materials, Vol. 73, DOI 10.1007/978-3-319-53306-3_2, pp. 17-30, 2017, Springer.

T. Ikeda, “The Use of Shape Memory Alloys in Aerospace Engineering,” Shape Memory and Superelastic Alloys: Applications and Technologies, Edited by K. Yamauchi, I. Ohkata, K. Tsuchiya, S. Miyazaki, ISBN 978-1-84569-707-5 (print), ISBN 978-0-85709-262-5 (online), pp. 125-140 (Chapter 12), April 2011, Woodhead Publishing Limited.

H. Tobushi, T. Inaba, T. Ikeda, Y. Takeichi, Y. Ono, R. Matsui, Strength of Materials - Fundamentals of Mechanical Design - (in Japanese), (2014), Corona Publishing Co. Ltd., Tokyo, Japan.

学術論文、評論

S. Tanaka, T. Ikeda, K. Goto, M. Arai, “Suppression of Out-of-Plane Thermal Deformation of CFRP Reflectors by Linear Actuators,” Transactions of the JSASS/ Aerospace Technology Japan, Vol. 16 Issue 2 (2018), pp. 116-122. DOI https://doi.org/10.2322/tastj.16.116

T. Kojima, T. Ikeda, A. Senba, M. Tamayama, H. Arizono, “Wind Tunnel Test of Morphing Flap Driven by Shape Memory Alloy Wires,” Transactions of the Japan Society for Aeronautical and Space Sciences/ Aerospace Technology Japan, Vol. 15 APISAT-2016 (2017), pp. a75-a82. DOI: https://doi.org/10.2322/tastj.15.a75

A. A. Rahman, T. Ikeda, A. Senba, “Memory Effects Performance of Polyurethane Shape Memory Polymer Composites (SMPC) in the Variation of Fiber Volume Fractions,” Fibers and Polymers, Vol. 18 No. 5 (2017), pp. 979-986. DOI 10.1007/s12221-017-6687-9

S. Yamamoto, T. Ikeda, A. Senba, “Effect of Temperature on Crack Kinking and Jumping in a Cross-Ply Laminated Beam,” Archives of Mechanics, Vol. 68 No. 5 (2016), pp. 349-369.

S. Tanaka, T. Ikeda, A. Senba, “Thermal Deformation Generated on a CFRP Laminated Reflector,” Bulletin of the JSME, Mechanical Engineering Journal, Vol. 3 (2016) No. 6, 16-00296 (9pp). DOI: 10.1299/mej.16-00296

S. Tanaka, T. Ikeda, A. Senba, “Sensitivity Analysis of Thermal Deformation of CFRP Laminate Reflector due to Fiber Orientation Error,” Journal of Mechanical Science and Technology, Vol. 30 No. 10 (2016), pp. 4423-4426. DOI 10.1007/s12206-016-0905-z

T. Uchida, T. Ikeda, A. Senba, K. Ishimura, “Evaluation of Thermal Strain Suppression Design of Piezoelectric Ceramic Actuators,” Transactions of the Japan Society for Aeronautical and Space Sciences/ Aerospace Technology Japan, Vol. 14 No. ists30 (2016), pp. Pc_19-Pc_24.

T. Ikeda, “Analytical Investigation of Strain Loading Frequency Effect on Stress-strain-temperature Relationship of Shape-memory Alloy,” Archives of Mechanics, Vol. 67 issue 4 (2015), pp. 275-291.

丹羽勇太, 池田忠繁, 仙場淳彦, “形状記憶ポリマの温度・ひずみ履歴依存性を表現できるマイクロメカニカルモデル,” 日本機械学会論文集, Vol. 80 No. 819 (2014), smm0310(17pp).

T. Ikeda, T. Takahashi, T. Uchida, K. Ishimura, “Shape Retainment by Utilizing Hysteresis in Piezoelectric Ceramics,” Transactions of the Japan Society for Aeronautical and Space Sciences / Aerospace Technology Japan, Vol. 12 No. ists29 (2014), pp. Pc_69-Pc_74.

岡功介, 池田忠繁, 仙場淳彦, “刺繍機によるCFRPドライプリフォームの最適繊維配置,” 日本複合材料学会誌, 40巻 1号 (2014), pp. 10-16.

A. Senba, T. Ikeda, T. Ueda, “Bi-Stable Composite Laminates Induced by Vibration of Piezoelectric Film Actuators,” International Journal of Aerospace and Lightweight Structures (IJALS), Vol. 2 No. 3 (2012), pp. 299–315. doi: 10.3850/S2010428612000384.

吉田圭吾, 池田忠繁, 上田哲彦, “温度依存性を考慮した強誘電体の構成モデル,” 日本機械学会論文集A編, Vol. 78 No. 791 (2012), pp. 1079-1089.

Raja S, T. Ikeda, D Dwarakanathan, “Deflection and Vibration Control of Laminated Plates Using Extension and Shear Actuated Fiber Composites,” Smart Materials Research, Vol. 2011, Article ID 515942 (15p). doi:10.1155/2011/515942.

T. Ikeda, S. Raja, T. Ueda, “Deformation of a Beam with Partially Debonded Piezoelectric Actuators,” Journal of Intelligent Material Systems and Structures, Vol. 21-March (2010), pp. 453–468.

T. Ueda, M. Iio, T. Ikeda, “Flutter Prediction Using Continuous Wavelet Transform,” Trans. JSASS, Vol. 51 No. 174 (2009), pp. 275-281.

池田忠繁, 吉田圭吾, 上田哲彦, “圧電材料のヒステリシスを表す一次元スイッチングモデル,” 日本機械学会論文集A編, Vol. 75 No. 749 (2009), pp. 41-48.

S. Raja, T. Ikeda, “Concept and Electro-elastic Modeling of Shear Actuated Fiber Composite using Micro-mechanics Approach,” Journal of Intelligent Material Systems and Structures, Vol. 19-October (2008), pp. 1173–1183.

M. Akita, T. Ikeda, T. Ueda, “Application of the Preisach Model to Tension-Compression Asymmetric Deformation Behavior of Martensitic Shape Memory Alloys,” Journal of Solid Mechanics and Materials Engineering, Vol. 2 No. 8 (2008), pp. 1172–1183.

上田哲彦, 高瀬昇平, 池田忠繁, 岩堀豊, “複合材料の圧縮座屈に対する不確定性の影響とその数値シミュレーション,” 日本複合材料学会誌, Vol. 34 No.4 (2008), pp. 141–147.

T. Ikeda, “Constitutive Model of Shape Memory Alloys for Asymmetric Quasiplastic Behavior,” Journal of Intelligent Material Systems and Structures, Vol. 19-May 2008, pp. 533–540.

T. Ueda, S. Takase, T. Ikeda, Y. Iwahori, “Influence of Uncertainties for Compressive Buckling of Composite Materials and Its Numerical Simulations,” Advanced Composite Materials, Vol. 17 (2008), pp. 177–190.

D. N. Kumar, S. Raja, T. Ikeda, “Active Vibration Control of Smart Plates with Partially Debonded Multilayered PZT Actuators,” Smart Materials and Structures, Vol. 16 No. 5 (2007), pp. 1584–1594.

T. Ikeda, S. Masuda, T. Miyasaka, T. Ueda, “Smart Vortex Generator Transformed by Ambient Temperature Change,” Transactions of the Japan Society for Aeronautical and Space Sciences, Vol. 50 No. 168 (2007), pp. 128-133.

S. Deguchi, Y. Matsuzaki, T. Ikeda, “Numerical Analysis of Effects of Transglottal Pressure Change on Fundamental Frequency of Phonation,” Annals of Otology, Rhinology & Laryngology, Vol. 116 No. 2 (2007), pp. 128-134.

秋田将史, 池田忠繁, 上田哲彦, “Preisachモデルのマルテンサイト形状記憶合金の引張・圧縮非対称変形挙動への応用,” 日本機械学会論文集A編, Vol. 72 No. 721 (2006), pp. 1340-1347.

Y. Matsuzaki, T. Ikeda, C. Boller, “New Technological Development of Passive and Active Vibration Control: Analysis and Test,” Smart Materials and Structures, Vol. 14 No. 2 (2005), pp. 343-348.

T. Ikeda, F. A. Nae, H. Naito, Y. Matsuzaki, “Constitutive Model of Shape Memory Alloys for Unidirectional Loading Considering Inner Hysteresis Loops,” Smart Materials and Structures, Vol. 13 No. 4 (2004), pp. 916-925.

F. A. Nae, T. Ikeda, Y. Matsuzaki, “Active Tuning of Shape Memory Alloy Pseudoelastic Property,” Smart Materials and Structures, Vol. 13 No. 3 (2004), pp. 503-511.

H. Naito, Y. Matsuzaki, T. Ikeda, “A Unified Constitutive Model of Phase Transformations and Rearrangements of Shape Memory Alloy Wires Subjected to Quasistatic Load,” Smart Materials and Structures, Vol. 13 No. 3 (2004), pp. 535-543.

内藤尚, 松崎雄嗣, 池田忠繁, 佐々木敏幸, “周期荷重下におけるTiNi形状記憶合金ワイヤの応力―ひずみ―温度関係の計測および数値解析,” 日本機械学会論文集(A編), 69巻679号 (2003), pp. 515-522.

F. A. Nae, Y. Matsuzaki, T. Ikeda, “Micromechanical Modeling of Polycrystalline Shape-Memory Alloys Including Thermo-mechanical Coupling,” Smart Materials and Structures, Vol. 12 No. 1 (2003), pp. 6-17.

青松達哉, 松崎雄嗣, 池田忠繁, “非対称分布声帯モデルによる疾患時の発声の数値解析(第2報, 非対称な声帯振動の数値シミュレーション解析),” 日本機械学会論文集(B編), 68巻667号 (2002), pp. 799-805.

青松達哉, 松崎雄嗣, 池田忠繁, “非対称分布声帯モデルによる疾患時の発声の数値解析(第1報, 発声開始肺圧の数値解析),” 日本機械学会論文集(B編), 68巻667号 (2002), pp. 793-798.

V. Baburaj, Y. Matsuzaki, F. A. Nae, T. Ikeda, “Specific Damping Capacity of Multiphase Unidirectional Hybrid Fiber Composites,” J. Intel. Mater. Syst. Struct., Vol. 12 No. 4 (2001), pp. 259-264.

H. Naito, J. Sato, K. Funami, Y. Matsuzaki, T. Ikeda, “Analytical Study on Training Effect of Pseudoelastic Transformation of Shape Memory Alloys in Cyclic Loading,” J. Intel. Mater. Syst. Struct., Vol. 12 No. 4 (2001), pp. 295-300.

T. Ikeda, Y. Matsuzaki, T. Aomatsu, “A Numerical Analysis of Phonation Using a Two-Dimensional Flexible Channel Model of the Vocal Folds,” Trans. ASME J. Biomech. Eng., Vol. 123 No. 6 (2001), pp. 571-579.

Y. Matsuzaki, H. Naito, T. Ikeda, K. Funami, “Thermo-Mechanical Behavior Associated with Pseudoelastic Transformation of Shape Memory Alloys,” Smart Mater. Struct., Vol. 10 No. 5 (2001), pp. 884-892.

青松達哉, 松崎雄嗣, 池田忠繁, “流体を伝えるつぶれやすい管の安定解析(剥離点の移動に伴う擾乱と下流流路の長さの影響について),” 日本機械学会論文集(B編), 67巻656号 (2001), pp. 926-933.

Y. Matsuzaki, T. Ikeda, F. A. Nae, T. Sasaki, “Electromagnetic Forces for a New Vibration Control System: Experimental Verification,” Smart Mater. Struct., Vol. 9 No. 2 (2000), pp. 127-131.

T. Ikeda, Y. Matsuzaki, “A One-Dimensional Unsteady Separable and Reattachable Flow Model for Collapsible Tube-Flow Analysis,” Trans. ASME J. Biomech. Eng., Vol.121 No.2 (1999), pp. 153-159.

Y. Matsuzaki, T. Ikeda, T. Matsumoto, T. Kitagawa, “Experiments on Steady and Oscillatory Flows at Moderate Reynolds Numbers in a Quasi-Two-Dimensional Channel With a Throat,” Trans. ASME J. Biomech. Eng., Vol.120 No.5 (1998), pp.594-601.

松崎雄嗣, 池田忠繁, “機械力学モデルによる発声の解析,” 喉頭, 9巻2号 (1997), pp. 104-109.

Y. Matsuzaki, D. Ishikubo, T. Kamita, T. Ikeda, “Vibration Control System Using Electromagnetic Forces,” J. Intel. Mater. Syst. Struct., Vol. 8 (1997), pp. 751-756.

池田忠繁, 松崎雄嗣, “声帯の衝突を考慮した二次元声帯モデル,” 日本機械学会論文集(C編), 63巻607号 (1997), pp. 693-699.

T. Ikeda, T. Yamane, T. Orita, T. Tateishi,“A Quantitative Visualization Study of Flow in a Scaled-up Model of a Centrifugal Blood Pump,” Artificial Organs, Vol. 20 No. 2, (1996), pp. 132-138.

T. Yamane, T. Ikeda, T. Orita, T. Tateishi,“Fluid Dynamics of Turbo Pumps for Artificial Heart,” Mater. Sci. Eng. C, Vol. 4 (1996), pp. 99-106.

山根隆志, 池田忠繁, 筒井達夫, 軸屋智昭, “モノピボット磁気支持遠心血液ポンプの基本特性,” 人工臓器, 24巻2号 (1995), pp. 323-326.

T. Yamane, T. Ikeda, T. Orita, T. Tsutsui, T. Jikuya,“Design of a Centrifugal Blood Pump with Magnetic Suspension,” Artificial Organs, Vol. 19 No. 7 (1995), pp. 625-630.

山根隆志, 池田忠繁, 折田豊樹, “コラプシブルチューブにおける自励振動流の抑制(棒状物体の挿入効果),” 日本機械学会論文集(B編), 61巻582号 (1995), pp. 510-516.

Y. Matsuzaki, T. Ikeda, T. Kitagawa, S. Sakata,“Analysis of Flow in a Two-Dimensional Collapsible Channel Using Universal“Tube”Law,” Trans. ASME J. Biomech. Eng., Vol. 116 No. 4 (1994), pp. 469-476.

池田忠繁, 松崎雄嗣, “一次元非定常声門流れによる音声の生成,” 日本機械学会論文集(B編), 60巻572号 (1994), pp. 1226-1233.

池田忠繁, 松崎雄嗣, 佐々木敏幸, “振動する狭さくをもつ二次元流路内のはく離流(数値解析と実験),” 日本機械学会論文集(B編), 60巻571号 (1994), pp. 750-757.

山根隆志, 折田豊樹, 池田忠繁, “コラプシブルチューブにおける流れの研究-圧力分布と抵抗特性について-,” 機械技術研究所所報, 47巻5号 (1993), pp. 187-203.

松崎雄嗣, 池田忠繁, “流体を伝える柔らかいチューブの二次元流路モデルによる数値解析,” 日本機械学会論文集(B編), 57巻534号 (1991), pp. 486-493.

池田忠繁, “形状記憶合金を用いたモーフィングに関する研究,” 日本航空宇宙学会誌, Vol. 64 No. 2 (2016), pp. 39-43.

池田忠繁, “スマート材料の構成方程式,” 日本航空宇宙学会誌, Vol. 58 No. 678 (2010), pp. 207-213.

池田忠繁, 松崎雄嗣, “アクティブ・アダプティブ構造技術の研究開発,” 日本航空宇宙学会誌, Vol. 52 No. 605 (2004), pp. 155-159.

池田忠繁, 松崎雄嗣, 青松達哉, “発声の計算バイオメカニクス,” 日本ME学会雑誌, Vol. 14 No. 10 (2000), pp. 59-62.

講演、シンポジウム、学会発表

A. Sumita, H. Tanaka, T. Ikeda, “Individual Drive and Control of Piezoelectric Actuators with a Single Power Supply Unit by Using Variable Resistors,” ICAST 2017 The 28th International Conference on Adaptive Structures and Technologies, 8-11 October 2017, Kraków, Poland.

T. Ikeda, H. Tanaka, H. Hata, N. Kogiso, K. Ishimura, T. Iwasa, “Shock Resistance of Piezoelectric Stack Actuators,” 31st ISTS, 2017.6.3-9, Matsuyama, Japan.

S. Tanaka, T. Ikeda, “Suppression of Out-of-plane Thermal Deformation of CFRP Reflectors by Linear Actuators,” 31st ISTS, 2017.6.3-9, Matsuyama, Japan.

T. Kojima, T. Ikeda, A. Senba, M. Tamayama, H. Arizono, “Morphing Flap Driven by Shape Memory Alloy Wires,” The 2016 Asia-Pacific International Symposium on Aerospace Technology, 2016.10.25-27, Toyama, Japan.

T. Ikeda, T. Sakai, Y. Fujii, T. Sato, A. Yokosu, S. Asai, H. Takenami, M. Arai, T. Ishikawa, K. Moriya, “R&D Activities on Automated Fiber Placement Technology at Nagoya University,” 17th US-Japan Conference on Composite Materials, 2016.8.1-2, Hokkaido University, Sapporo, Japan.

M. Ishigami, N. Torii, K. Oka, T. Ikeda, “Multifunctional Composite with Reinforcement Fibers and Functional Fibers Optimally Placed,” Proceedings of The 13th International Conference on Flow Processes in Composite Materials, 2016.7.6-9, Kyoto Institute of Technology, Kyoto, Japan.

T. Ikeda, K. Oka, T. Nishida, “Eigen-frequency Control Design of CFRP Structures Using an Embroidery Machine,” First International Symposium on Flutter and its Application (ISFA2016), 2016.5.15-17, Tokyo, Japan.

N. Torii, K. Oka, T. Ikeda, “Creation of Smart Composites Using an Embroidery Machine,” SPIE's 23rd Annual International Symposium on Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.3.20-24, Las Vegas, USA.

S. Tanaka, T. Ikeda, A. Senba, “Sensitivity Analysis of Thermal Deformation of CFRP Laminate Reflector due to Fiber Orientation Error,” 3rd International Conference on Materials and Reliability (ICMR2015), 2015.11.23-25, Jeju, Korea.

S. Tanaka, A. Senba, T. Ikeda, T. Ishikawa, “Thermal Deformation Generating on a CFRP Laminated Reflector,” International Conference on Advanced Technology in Experimental Mechanics 2015, The 14th Asian Conference on Experimental Mechanics (ACEM14), Abstract of ATEM’15, JSME-MMD, 2015.10.4-8, Loisir Hotel Toyohashi, Toyohasshi, Japan.

N. Nanami, T. Sato, T. Ikeda, T. Ishikawa, “Flexural Performance and Process Conditions of Thermoplastic Composite Laminates Processed by Automated Tape Placement,” 20th International Conference on Composites Materials (ICCM20), 19-24 July 2015, Copenhagen, Denmark.

T. Uchida, T. Ikeda, A. Senba, K. Ishimura, “Evaluation of Thermal Strain Suppression Design of Piezoelectric Ceramic Actuators,” 30th ISTS, 2015.7.4-10, Kobe, Japan.

T. Ikeda, “Analysis of Loading Frequency on Stress-strain-temperature Relationship of Shape Memory Alloys,” 39th Solid Mechanics Conference, 2014.9.1-5, Zakopane, Poland.

S. Yamamoto, T. Ikeda, “Crack Propagation Analysis on DCB Tests of Cross-ply CFRP Laminates,” The 2013 Asia-Pacific International Symposium on Aerospace Technology (APISAT -2013) , 2013.11.20-22, Takamatsu, Japan.

K. Oka, T. Ikeda, A. Senba, “Optimal Placement Design of Fibers Partially Set by an Embroidery Machine” The 2013 Asia-Pacific International Symposium on Aerospace Technology (APISAT -2013), 2013.11.20-22, Takamatsu, Japan.

T. Nishida, T. Ikeda, A. Senba, “Optimal Fiber Placement Including Effects of Embroidery,” 19th International Conference on Composite Materials (ICCM19), 2013.7.28-8.2, Montreal, Canada.

A. Senba, T. Ikeda, “A Design Strategy for Bi-stable Unsymmetric Composite Laminates Induced by Vibration,” 19th International Conference on Composite Materials (ICCM19), 2013.7.28-8.2, Montreal, Canada.

T. Ikeda, T. Takahashi, T. Uchida, K. Ishimura, “Shape Retainment by Utilizing Hysteresis in Piezoelectric Ceramics,” International Symposium on Space Technology and Science (ISTS), 2013.6.2-9, Nagoya, Japan.

T. Ikeda, T. Takahashi, “Feasibility Study of Shape Control with Zero Applied Voltage Utilizing Hysteresis in Strain-electric Field Relationship of Piezoelectric Ceramics,” SPIE's 20th Annual International Symposium on Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013.3.10-14, San Diego, USA.

ページの先頭へ

ホーム
訪問者別メニュー