CHUBU UNIVERSITY
  • Print only the body of the page. Set to print background colors and images.
  • Print the whole page. Set to print background colors and images.

IKEDA Tadashige

Profile

Year of Birth 1965
Place of Birth Aichi
Title Professor
Belong to Dept. of Astronautics and Aeronautics
Dept. of Mechanical Engineering
Mechanical Engineering (graduate school)
Graduated Department of Aeronautical Engineering, Graduate School of Engineering, Nagoya University
Degree Doctor of Engineering
Academic Institutional Membership Japan Society for Aeronautical and Space Sciences
Japan Society of Mechanical Engineers
Japan Society for Composite Materials
American Institute of Aeronautics and Astronautics
Field of Study Aerospace Structures, Smart Materials and Structural Systems
Research, Studies Constitutive Modelling of Smart Materials such as Shape Memory Materials and Piezoelectric Materials, Applications of Smart Materials such as Morphing Wings, Creation of Multifunctional Materials with Fiber Placement

Books Published, Translation

T. Ikeda, “One-Dimensional Phase Transformation Model and Its Application to Damping Enhancement Analysis,” Advances in Shape Memory Materials – In Commemoration of the Retirement of Professor Hisaaki Tobushi, Edited by Q. Sun, R. Matsui, K. Takeda, E. A. Pieczyska, ISBN 978-3-319-53305-6 (print), ISBN 978-3-319-53306-3 (eBook), Advanced Structured Materials, Vol. 73, DOI 10.1007/978-3-319-53306-3_2, pp. 17-30, 2017, Springer.

T. Ikeda, “The Use of Shape Memory Alloys in Aerospace Engineering,” Shape Memory and Superelastic Alloys: Applications and Technologies, Edited by K. Yamauchi, I. Ohkata, K. Tsuchiya, S. Miyazaki, ISBN 978-1-84569-707-5 (print), ISBN 978-0-85709-262-5 (online), pp. 125-140 (Chapter 12), April 2011, Woodhead Publishing Limited.

H. Tobushi, T. Inaba, T. Ikeda, Y. Takeichi, Y. Ono, R. Matsui, Strength of Materials - Fundamentals of Mechanical Design - (in Japanese), (2014), Corona Publishing Co. Ltd., Tokyo, Japan.

Academic Papers, Critique

S. Tanaka, T. Ikeda, K. Goto, M. Arai, “Suppression of Out-of-Plane Thermal Deformation of CFRP Reflectors by Linear Actuators,” Transactions of the JSASS/ Aerospace Technology Japan, Vol. 16 Issue 2 (2018), pp. 116-122. DOI https://doi.org/10.2322/tastj.16.116

T. Kojima, T. Ikeda, A. Senba, M. Tamayama, H. Arizono, “Wind Tunnel Test of Morphing Flap Driven by Shape Memory Alloy Wires,” Transactions of the Japan Society for Aeronautical and Space Sciences/ Aerospace Technology Japan, Vol. 15 APISAT-2016 (2017), pp. a75-a82. DOI: https://doi.org/10.2322/tastj.15.a75

A. A. Rahman, T. Ikeda, A. Senba, “Memory Effects Performance of Polyurethane Shape Memory Polymer Composites (SMPC) in the Variation of Fiber Volume Fractions,” Fibers and Polymers, Vol.18 No.5 (2017), pp. 979-986. DOI 10.1007/s12221-017-6687-9

S. Yamamoto, T. Ikeda, A. Senba, “Effect of Temperature on Crack Kinking and Jumping in a Cross-Ply Laminated Beam,” Archives of Mechanics, Vol. 68 No. 5 (2016), pp. 349-369.

S. Tanaka, T. Ikeda, A. Senba, “Thermal Deformation Generated on a CFRP Laminated Reflector,” Bulletin of the JSME, Mechanical Engineering Journal, Vol. 3 (2016) No. 6, 16-00296 (9pp). DOI: 10.1299/mej.16-00296

S. Tanaka, T. Ikeda, A. Senba, “Sensitivity Analysis of Thermal Deformation of CFRP Laminate Reflector due to Fiber Orientation Error,” Journal of Mechanical Science and Technology, Vol. 30 No. 10 (2016), pp. 4423-4426. DOI 10.1007/s12206-016-0905-z

T. Uchida, T. Ikeda, A. Senba, K. Ishimura, “Evaluation of Thermal Strain Suppression Design of Piezoelectric Ceramic Actuators,” Transactions of the Japan Society for Aeronautical and Space Sciences/ Aerospace Technology Japan, Vol. 14 No. ists30 (2016), pp. Pc_19-Pc_24.

T. Ikeda, “Analytical Investigation of Strain Loading Frequency Effect on Stress-Strain-Temperature Relationship of Shape-Memory Alloy,” Archives of Mechanics, Vol. 67 (2015), pp. 275-291.

Y. Niwa, T. Ikeda, A. Senba, “Micromechanical Model of Shape Memory Polymer Including Temperature-Strain History Dependence,” Transactions of the Japan Society of Mechanical Engineers (in Japanese), Vol. 80 No. 819 (2014), smm0310 (17pp).

T. Ikeda, T. Takahashi, T. Uchida, K. Ishimura, “Shape Retainment by Utilizing Hysteresis in Piezoelectric Ceramics,” The ISTS Special Issues of Transactions of JSASS Aerospace Technology Japan, Vol. 12 No. ists29 (2014), pp. Pc_69-Pc_74.

K. Oka, T. Ikeda, A. Senba, T. Ueda, “Optimal Fiber Placement of CFRP Dry Preforrn by Using an Embroidery Machine,” Journal of the Japan Society for Composite Materials (in Japanese), Vol. 40 No. 1 (2014), pp. 10-16.

A. Senba, T. Ikeda, T. Ueda, “Bi-Stable Composite Laminates Induced by Vibration of Piezoelectric Film Actuators,” International Journal of Aerospace and Lightweight Structures (IJALS), Vol. 2 No. 3 (2012), pp. 299-315.

K. Yoshida, T. Ikeda, T. Ueda, “Constitutive Model of Ferroelectric Materials for Expressing Temperature Dependent Property,” Transactions of the Japan Society of Mechanical Engineers. A (in Japanese), Vol. 78 No. 791 (2012), pp. 1079-1089.

Raja S, T. Ikeda, D Dwarakanathan, “Deflection and Vibration Control of Laminated Plates Using Extension and Shear Actuated Fiber Composites,” Smart Materials Research, Vol. 2011, Article ID 515942 (15p).

T. Ikeda, S. Raja, T. Ueda, “Deformation of a Beam with Partially Debonded Piezoelectric Actuators,” Journal of Intelligent Material Systems and Structures, Vol. 21 No. 4 (2010), pp. 453-468.

T. Ueda, M. Iio, T. Ikeda, “Flutter Prediction Using Continuous Wavelet Transform,” Trans. JSASS, Vol. 51 No. 174 (2009), pp. 275-281.

T. Ikeda, K. Yoshida, T. Ueda, “One-Dimensional Switching Model for Hysteresis in Piezoelectric Materials,” Transactions of the Japan Society of Mechanical Engineers. A (in Japanese), Vol. 75 No. 749 (2009), pp. 41-48.

S. Raja, T. Ikeda, “Concept and Electro-elastic Modeling of Shear Actuated Fiber Composite using Micro-mechanics Approach,” Journal of Intelligent Material Systems and Structures, Vol. 19 No. 10 (2008), pp. 1173-1183.

M. Akita, T. Ikeda, T. Ueda, “Application of the Preisach Model to Tension-Compression Asymmetric Deformation Behavior of Martensitic Shape Memory Alloys,” Journal of Solid Mechanics and Materials Engineering, Vol. 2 No. 8 (2008), pp. 1172-1183.

T. Ueda, S. Takase, T. Ikeda, Y. Iwahori, “Influence of Uncertainties for Compressive Buckling of Composite Materials and Its Numerical Simulations,” Advanced Composite Materials, Vol. 17 No. 2 (2008), pp. 177-190.

T. Ikeda, “Constitutive Model of Shape Memory Alloys for Asymmetric Quasiplastic Behavior,” Journal of Intelligent Material Systems and Structures, Vol. 19 No. 5 (2008), pp. 533-540.

D. N. Kumar, S. Raja, T. Ikeda, “Active Vibration Control of Smart Plates with Partially Debonded Multilayered PZT Actuators,” Smart Materials and Structures, Vol. 16 No. 5 (2007), pp. 1584-1594.

T. Ikeda, S. Masuda, T. Miyasaka, T. Ueda, “Smart Vortex Generator Transformed by Ambient Temperature Change,” Transactions of JSASS, Vol. 50 No. 168 (2007), pp. 128-133.

S. Deguchi, Y. Matsuzaki, T. Ikeda, “Numerical Analysis of Effects of Transglottal Pressure Change on Fundamental Frequency of Phonation,” Annals of Otology, Rhinology & Laryngology, Vol. 116 No. 2 (2007), pp. 128-134.

Y. Matsuzaki, T. Ikeda, C. Boller, “New technological development of passive and active vibration control: analysis and test,” Smart Materials and Structures, Vol. 14 No. 2 (2005), pp. 343-348.

T. Ikeda, F. A. Nae, H. Naito, Y. Matsuzaki, “Constitutive model of shape memory alloys for unidirectional loading considering inner hysteresis loops,” Smart Materials and Structures, Vol. 13 No. 4 (2004), pp. 916-925.

H. Naito, Y. Matsuzaki, T. Ikeda, “A Unified Constitutive Model of Phase Transformations and Rearrangements of Shape Memory Alloy Wires Subjected to Quasistatic Load,” Smart Materials and Structures, Vol. 13 No. 3 (2004), pp. 535-543.

F. A. Nae, T. Ikeda, Y. Matsuzaki, “Active Tuning of Shape Memory Alloy Pseudoelastic Property,” Smart Materials and Structures, Vol. 13 No. 3 (2004), pp. 503-511.

H. Naito, Y. Matsuzaki, T. Ikeda, T. Sasaki, “Experimental and Analytical Studies on Stress-Strain-Temperature Relationship of TiNi Shape memory Alloy Subjected to Cyclic Loadings,” Transactions of the Japan Society of Mechanical Engineers. A (in Japanese), Vol. 69 No. 679 (2003), pp. 515-522.

F. A. Nae, Y. Matsuzaki, T. Ikeda, “Micromechanical Modeling of Polycrystalline Shape-Memory Alloys Including Thermo-mechanical Coupling,” Smart Materials and Structures, Vol. 12 No. 1 (2003), pp. 6-17.

T. Aomatsu, Y. Matsuzaki, T. Ikeda, “Numerical Analysis of Pathological Voice Production Using Asymmetric Distributed-Parameter Model for Vocal Fold (2nd Report, Numerical Simulation and Analysis of Asymmetric Vocal Fold Vibration),” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese), Vol. 68 No. 667 (2002), pp. 799-805.

T. Aomatsu, Y. Matsuzaki, T. Ikeda, “Numerical Analysis of Pathological Voice Production Using Asymmetric Distributed-Parameter Model for Vocal Fold (1st Report, Numerical Analysis of Phonation Threshold Pressure),” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese), Vol. 68 No. 667 (2002), pp. 793-798.

T. Ikeda, Y. Matsuzaki, T. Aomatsu, “A Numerical Analysis of Phonation Using a Two-Dimensional Flexible Channel Model of the Vocal Folds,” Trans. ASME J. Biomech. Eng., Vol. 123 No. 6 (2001), pp. 571-579.

Y. Matsuzaki, H. Naito, T. Ikeda, K. Funami, “Thermo-Mechanical Behavior Associated with Pseudoelastic Transformation of Shape Memory Alloys,” Smart Materials and Structures, Vol. 10 No. 5 (2001), pp. 884-892.

T. Aomatsu, Y. Matsuzaki, T. Ikeda, “Stability Analysis of a Collapsible Tube Conveying Fluid (On Effects of Perturbations Induced by Movement of Separation Point and Length of Downstream Channel),” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese), Vol. 67 No. 656 (2001), pp. 926-933.

H. Naito, J. Sato, K. Funami, Y. Matsuzaki, T. Ikeda, “Analytical Study on Training Effect of Pseudoelastic Transformation of Shape Memory Alloys in Cyclic Loading,” Journal of Intelligent Material Systems and Structures, Vol. 12 No. 4 (2001), pp. 295-300.

V. Baburaj, Y. Matsuzaki, F. A. Nae, T. Ikeda, “Specific Damping Capacity of Multiphase Unidirectional Hybrid Fiber Composites,” Journal of Intelligent Material Systems and Structures, Vol. 12 No. 4 (2001), pp. 259-264.

Y. Matsuzaki, T. Ikeda, F. A. Nae, T. Sasaki, “Electromagnetic Forces for a New Vibration Control System: Experimental Verification,” Smart Materials and Structures, Vol. 9 No. 2 (2000), pp. 127-131.

T. Ikeda, Y. Matsuzaki, “A One-Dimensional Unsteady Separable and Reattachable Flow Model for Collapsible Tube-Flow Analysis,” Trans. ASME J. Biomech. Eng., Vol. 121 No. 2 (1999), pp. 153-159.

Y. Matsuzaki, T. Ikeda, T. Matsumoto, T. Kitagawa, “Experiments on Steady and Oscillatory Flows at Moderate Reynolds Numbers in a Quasi-Two-Dimensional Channel with a Throat,” Trans. ASME J. Biomech. Eng., Vol. 120 No. 5 (1998), pp. 594-601.

Y. Matsuzaki, T. Ikeda, “An Analysis of Phonation Using a Mechanical Model,” The Larynx Japan (in Japanese), Vol. 9 No. 2 (1997), pp. 104-109.

Y. Matsuzaki, D. Ishikubo, T. Kamita, T. Ikeda, “Vibration Control System Using Electromagnetic Forces,” Journal of Intelligent Material Systems and Structures, Vol. 8 No. 9 (1997), pp. 751-756.

T. Ikeda, Y. Matsuzaki, “A Two-Dimensional Vocal Cord Model for Heavy Voice,” Transactions of the Japan Society of Mechanical Engineers. C (in Japanese), Vol. 63 No. 607 (1997), pp. 693-699.

T. Ikeda, T. Yamane, T. Orita, T. Tateishi,“A Quantitative Visualization Study of Flow in a Scaled-up Model of a Centrifugal Blood Pump,” Artificial Organs, Vol. 20 No. 2 (1996), pp. 132-138.

T. Yamane, T. Ikeda, T. Orita, T. Tateishi, “Fluid Dynamics of Turbo Pumps for Artificial Heart,” Materials Science and Engineering C, Vol. 4 No. 2 (1996), pp. 99-106.

T. Yamane, T. Ikeda, T. Orita, T. Tsutsui, T. Jikuya,“Design of a Centrifugal Blood Pump with Magnetic Suspension,” Artificial Organs, Vol. 19 No. 7 (1995), pp. 625-630.

T. Yamane, T. Ikeda, T. Tsutsui, T. Jikuya, “Fundamental Characteristics of the Mono-Pivot Magnetic-Suspension Centrifugal Blood Pump,” The Japanese Journal of Artificial Organs (in Japanese), Vol. 24 No. 2 (1995), pp. 323-326.

T. Yamane, T. Ikeda, T. Orita, “Suppression of Self-Excited Oscillatory Flow in Collapsible Tubes (Effect of Rod Insertion),” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese), Vol. 61 No. 582 (1995), pp. 510-516.

Y. Matsuzaki, T. Ikeda, T. Kitagawa, S. Sakata,“Analysis of Flow in a Two-Dimensional Collapsible Channel Using Universal“Tube”Law,” Trans. ASME J. Biomech. Eng., Vol. 116 No. 4 (1994), pp. 469-476.

T. Ikeda, Y. Matsuzaki, “Synthesis of Voiced Sound with a One-Diensional Unsteady Glottal Flow Model,” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese), Vol. 60 No. 572 (1994), pp. 1226-1233.

T. Ikeda, Y. Matsuzaki, T. Sasaki, “Separable Flow in a Channel with an Oscillating Constriction (Numerical Analysis and Experiment),” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese), Vol. 60 No. 571 (1994), pp. 750-757.

Y. Matsuzaki, T. Ikeda, “Numerical Analysis of a Collapsible Tube Conveying Fluid; Two-Dimensional Channel Model,” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese), Vol. 57 No. 534 (1991), pp. 486-493.

Lectures, Symposium, Presentation

A. Sumita, H. Tanaka, T. Ikeda, “Individual Drive and Control of Piezoelectric Actuators with a Single Power Supply Unit by Using Variable Resistors,” ICAST 2017 The 28th International Conference on Adaptive Structures and Technologies, 8-11 October 2017, Kraków, Poland.

T. Ikeda, H. Tanaka, H. Hata, N. Kogiso, K. Ishimura, T. Iwasa, “Shock Resistance of Piezoelectric Stack Actuators,” 31st ISTS, 2017.6.3-9, Matsuyama, Japan.

S. Tanaka, T. Ikeda, “Suppression of Out-of-plane Thermal Deformation of CFRP Reflectors by Linear Actuators,” 31st ISTS, 2017.6.3-9, Matsuyama, Japan.

T. Kojima, T. Ikeda, A. Senba, M. Tamayama, H. Arizono, “Morphing Flap Driven by Shape Memory Alloy Wires,” The 2016 Asia-Pacific International Symposium on Aerospace Technology, 2016.10.25-27, Toyama, Japan.

T. Ikeda, T. Sakai, Y. Fujii, T. Sato, A. Yokosu, S. Asai, H. Takenami, M. Arai, T. Ishikawa, K. Moriya, “R&D Activities on Automated Fiber Placement Technology at Nagoya University,” 17th US-Japan Conference on Composite Materials, 2016.8.1-2, Hokkaido University, Sapporo, Japan.

M. Ishigami, N. Torii, K. Oka, T. Ikeda, “Multifunctional Composite with Reinforcement Fibers and Functional Fibers Optimally Placed,” Proceedings of The 13th International Conference on Flow Processes in Composite Materials, 2016.7.6-9, Kyoto Institute of Technology, Kyoto, Japan.

T. Ikeda, K. Oka, T. Nishida, “Eigen-frequency Control Design of CFRP Structures Using an Embroidery Machine,” First International Symposium on Flutter and its Application (ISFA2016), 2016.5.15-17, Tokyo, Japan.

N. Torii, K. Oka, T. Ikeda, “Creation of Smart Composites Using an Embroidery Machine,” SPIE's 23rd Annual International Symposium on Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.3.20-24, Las Vegas, USA.

S. Tanaka, T. Ikeda, A. Senba, “Sensitivity Analysis of Thermal Deformation of CFRP Laminate Reflector due to Fiber Orientation Error,” 3rd International Conference on Materials and Reliability (ICMR2015), 2015.11.23-25, Jeju, Korea.

S. Tanaka, A. Senba, T. Ikeda, T. Ishikawa, “Thermal Deformation Generating on a CFRP Laminated Reflector,” International Conference on Advanced Technology in Experimental Mechanics 2015, The 14th Asian Conference on Experimental Mechanics (ACEM14), Abstract of ATEM’15, JSME-MMD, 2015.10.4-8, Loisir Hotel Toyohashi, Toyohasshi, Japan.

N. Nanami, T. Sato, T. Ikeda, T. Ishikawa, “Flexural Performance and Process Conditions of Thermoplastic Composite Laminates Processed by Automated Tape Placement,” 20th International Conference on Composites Materials (ICCM20), 19-24 July 2015, Copenhagen, Denmark.

T. Uchida, T. Ikeda, A. Senba, K. Ishimura, “Evaluation of Thermal Strain Suppression Design of Piezoelectric Ceramic Actuators,” 30th ISTS, 2015.7.4-10, Kobe, Japan.

T. Ikeda, “Analysis of Loading Frequency on Stress-strain-temperature Relationship of Shape Memory Alloys,” 39th Solid Mechanics Conference, 2014.9.1-5, Zakopane, Poland.

S. Yamamoto, T. Ikeda, “Crack Propagation Analysis on DCB Tests of Cross-ply CFRP Laminates,” The 2013 Asia-Pacific International Symposium on Aerospace Technology (APISAT -2013) , 2013.11.20-22, Takamatsu, Japan.

K. Oka, T. Ikeda, A. Senba, “Optimal Placement Design of Fibers Partially Set by an Embroidery Machine” The 2013 Asia-Pacific International Symposium on Aerospace Technology (APISAT -2013) , 2013.11.20-22, Takamatsu, Japan.

T. Nishida, T. Ikeda, A. Senba, “Optimal Fiber Placement Including Effects of Embroidery,” 19th International Conference on Composite Materials (ICCM19), 2013.7.28-8.2, Montreal, Canada.

A. Senba, T. Ikeda, “A Design Strategy for Bi-stable Unsymmetric Composite Laminates Induced by Vibration,” 19th International Conference on Composite Materials (ICCM19), 2013.7.28-8.2, Montreal, Canada.

T. Ikeda, T. Takahashi, T. Uchida, K. Ishimura, “Shape Retainment by Utilizing Hysteresis in Piezoelectric Ceramics,” International Symposium on Space Technology and Science (ISTS), 2013.6.2-9, Nagoya, Japan.

T. Ikeda, T. Takahashi, “Feasibility Study of Shape Control with Zero Applied Voltage Utilizing Hysteresis in Strain-electric Field Relationship of Piezoelectric Ceramics,” SPIE's 20th Annual International Symposium on Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013.3.10-14, San Diego, USA.

Page Top