CHUBU UNIVERSITY
  • Print only the body of the page. Set to print background colors and images.
  • Print the whole page. Set to print background colors and images.

TAKEUCHI Yoshimi

Profile

Year of Birth 1948
Place of Birth Higashiura, Aichi
Title Advisor to the Chancellor, Professor
Belong to Chubu University
Dept. of Mechanical Engineering
Mechanical Engineering (graduate school)
Office for Academic Advancement
Graduated The University of Tokyo
Degree Dr. of Engineering, The University of Tokyo
Academic Institutional Membership Japan Society of Mechanical Engineers (FA Division chairman: 1996, Manufacturin & Machine Tool Division Chairman: 2004)
Japan Society for Precision Engineering (Vice President: 2008-2010)
Japan Society of Abrasive Technology
Japanese Society of Die and Mould Technology (Board member: 1990-1994)
International Academy for Production Engineering
Engineering Academy of Japan
Field of Study Manufacturing System Engineering
Research, Studies Dexterous Machining, Multi-axis Multi-tasking Machining, Ultraprecision Micromachining
Curriculum Specialized Material Strength B, Mechanics

Academic Papers, Critique

Machining of Smooth Optical Surfaces by Ultraprecision Milling with Compensated Feeding Mechanisms, Int. J. of Automation Tech., Fuji Tech. Press, Vol.13, No.2 (2019.3) 185-190

Recent Advances in Multiaxis Control and Multitasking Machining, Review Paper, Int. J. of Automation Tech., Fuji Tech. Press, Vol.11, No.2 (2017) 140-154

Development of Cutting Force Prediction Method using CNC Openness, Int. J. of Automation Tech., Fuji Tech. Press, Vol.10, No.2 (2016) 253-261

Dexterous Creation of Soccer-ball Pattern by Using Urethane Rubber, Int. J. of Automation Tech., Fuji Tech. Press, Vol.10, No.2 (2016) 239-243

Development of Online Real-Time Collision Free machining Using Simulation with CNC Openness, Int. J. of Automation Tech., Fuji Tech. Press, Vol.9, No.4 (2015) 403-410

Energy-Saving Machining of Multi-Functional Machine Tools, Int. J. of Automation Tech., Fuji Tech. Press, Vol.9, No.2 (2015) 135-142

Dexterous Machining of Soft Objects by Means of Flexible Clamper, Int. J. of Automation Tech., Fuji Tech. Press, Vol.9, No.1 (2015) 83-88

Current State of the Art of Multi-Axis Control Machine Tools, Journal of Robotics and Mechatronics, Fuji Tech. Press, Vol.26, No.6 (2014) 529-539

Fundamental Study on Hole Fabrication inside a Hole by Means of Electrical Discharge Machining, Int. J. of Automation Tech., Fuji Tech. Press, Vol.8, No.5 (2014) 773-782

Dexterous Machining Aiming at High Value-added Products, Int. Jour. of Prec. Eng. and Manuf. -Green Tech., Springer Verlag, Vol.1, No.3 (2014) 177-181

Ultraprecision Micromachining of Hard Material with Tool Wear suppression by Using Diamond Tool with Special Chamfer, Annals of the CIRP, Vol.62/1 (2013) 51-54

The Effect of Cutting Point Swivel Machining by Using Round Tool with Special Chamfer, Key Engineering Materials, Vols. 523-524 (2012) 119-124

Development of an Interactive Assistance System for 5-Axis Control Dexterous Ultraprecision Micromilling of Ruled Surface with Side Cutting Edge, Key Engineering Materials, Vol. 516 (2012) 176-180

Development of CAPP/CAM System for Ultraprecision Micromachining -Process Planning Considering Setting Error-, Key Engineering Materials, Vol. 516 (2012) 66-72

Machine Tool Structure Design Considering of Sliding Joint Damping, Int. J. of Automation Tech., Fuji Tech. Press, Vol.5, No.5 (2011) 722-728

Fabrication of Microinducer by 5-Axis Control Ultraprecision Micromilling, Annals of the CIRP, Vol.60/1 (2011) 407-410

Development of Table-on-Table-Type Five-Axis Machining Center: New Structure and Basic Characteristics, Int. J. of Automation Tech., Fuji Tech. Press, Vol.5, No.2 (2011) 247-254

Direct Measurement of Electrode Movement During Electrical Discharge Machining by Means of Automatic Discharge Gap Controller, Int. J. of Automation Tech., Fuji Tech. Press, Vol.4, No.6 (2010) 552-561

Design and Implementation of Automatic Discharge Gap Controller for a Curved Hole Creating Microrobot with an Electrical Discharge Machining Function, Int. J. of Automation Tech., Fuji Tech. Press, Vol.4, No.6 (2010) 542-551

Development of CAD/CAM Sytsem for Croee Section's Changing Hole Electrical Discharge Machining –Formulation of Post Processor-, Journal of Adv. Mech. Design, Systems, and Manuf., JSME, Vol.4, No.5 (2010) 1054-1065

Development of CAM System for Multi-Tasking Machine Tools, Journal of Adv. Mech. Design, Systems, and Manuf., JSME, Vol.4, No. 5 (2010) 816-826

Study on an Interactive System for Conceptual and Basic Design of Machine Tool Structure, Journal of Adv. Mech. Design, Systems, and Manuf., JSME, Vol.4, No.5 (2010) 795-805

Creation of V-Shaped Microgrooves with Flat-Ends by 6-axis Control Ultraprecision Machining, Annals of the CIRP, Vol.59/1 (2010) 61-66

Interactive Design-Assistance System of Machine Tool Structure in Conceptual and Fundamental Design Stage, Int. J. of Automation Tech., Fuji Tech. Press, Vol.4, No.3 (2010) 303-311

Optical Mold Creaning Using Carbon Dioxide, Int. J. of Automation Tech., Fuji Tech. Press, Vol.4, No.1 (2010) 39-44

Lectures, Symposium, Presentation

Development of a Postprocessing System of Resin Organ Models by Utilizing 3-Axis CNC Abrasive Machining, Proc. of 17th ICPE, Kamakura (2018.11) B-2-7, USB.1-4

Deep Hole Machining with High Dimension Accuracy by Small Diameter Tools, Kamakura, Proc. of 17th ICPE, Kamakura (2018.11) A-4-8, USB.1-4

Fabrication of Strength-Enhanced Eccentric Shaped Ball Eng-Mill, Proc. of 17th ICPE, Kamakura (2018.11) A-4-7, USB.1-6

Three-dimensional Micro Shape Creation on a Workpiece Located by Industrial Robot, Proc. of Int. Symp. on Precision Eng. and Sustainable Manufacturing (PRESM2018), Sapporo (2018.7) USB.1-3

Development of CAM System for Variable Pitch Screw Fbrication, Proc. of Int. Symp. on Precision Eng. and Sustainable Manufacturing (PRESM2018), Sapporo (2018.7) USB.1-5

Three-dimensional Micro Shape Creation by On-machine Scanning Measurement, Proc. of 18th EUSPEN Int. Conf., Venice (2018.5) USB.135-136

A Study on Automatic Compensation of Workpiece Setting Errors in Ultraprecision Machining, Proc. of 7th ASPEN, Seoul (2017.8) USB.1-3

Hole Fabrication inside a Hole by Means of Electrical Discharge Machining -Expansion of Machinable Hole Diameter-, Proc. of 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Hiroshima (2017.11) CD-ROM 1-5

Creation of New Eccentric shaped Ball End-Mill without Separation Line, Proc. of 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Hiroshima (2017.11) CD-ROM 1-5

Automated Finishing of Organ Models Created by 3D printing, Proc. of 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Hiroshima (2017.11) CD-ROM 1-5

Automated teaching Process in Teaching Playback method for Curved Hole Electrical Discharge Machining, Int. Conf. on Design and Concurrent Eng. 2017 & Manufacturing Systems Conf. 2017, JSME, Osaka (2017.9) Short paper No.25, 1-5

Setting errors compensation of a workpiece located by industrial robots, Proc. of 17th EUSPEN Int. Conf., Hannover (2017.5) USB.223-224

Dexterous Machining of Unstable Thin Plate, Proc. of CIRP Conf. on Manufacturing Systems, Procedia CIRP 63 (2017.5) 324-329

5-Axis Control Finishing for Decreased Tool Wear, Proc. of CIRP Conf. on Manufacturing Systems, Procedia CIRP 63 (2017.5) 313-317

5-Axis Control Finishing Suppressing Tool Wear, Proc. of ICPE, Hamamatsu (2016) B305, USB.1-4

Automatic Tool Setting Errors compensation in Ultraprecision Machining, Proc. of 16th EUSPEN Int. Conf., Nottingham (2016) USB.483-484

6-axis Control Ultraprecision Machining Based on Compensation of Tool Setting Errors, Proc. of 15th EUSPEN Int. Conf., Leuven (2015) 297-298

5-axis Control Ultraprecision Machining Based on Tool Setting Errors Compensation ICMT, Proc. of 18th Int. Conf. on Mechatronics Technology (ICMT2014), Taipei (2014), USB 1-4

Fin Fabrication inside a Hole by Means of Electrical Discharge Machining and Reciprocating Block Slider Crank Mechanism -Improvement of Machining Device and Verification of Its Potential-, Proc. of ICPE, Kanazawa, Poster 28 (2014) 690-691

Reduction of Power Consumption in Rough Turning,

Proc. of ICPE, Kanazawa, D09 (2014) 473-477

Tool Setting of Error Compensation for Multi-axis Control Ultra-precision Machining, Proc. of 14th EUSPEN Int. Conf., Dovrovnik (2014) Vol.2, 43-46

Ultraprecision Cutting of SiC by Rotational Diamond Tool with Special Chamfer, Proc. of ASPEN, Taipei (2013) USB.1-4

Development of CAPP System for Multi-tasking Machining of Complex Shapes, Proc. of 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Matsushima (2013) D018, SD-Card, 527-530

Fundamental Study on Fabrication inside a Hole by Means of Electrical Discharge Machining, Proc. of 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Matsushima (2013) C015, SD-Card, 373-376

Fabrication of Spherical Microlens Array Mold by Ultra-precision Multiaxis-control Milling, Proc. of 13th EUSPEN Int. Conf., Vol.2, Berlin (2013) 101-104

5-Axis Control Ultraprecision Dexterous Micromachining of Möbius Ring, Proc. of 13th EUSPEN Int. Conf., Vol.2, Berlin (2013) 64-67

Application of ultraprecision microgrooves to dental implant and blood inspection, Proc. 1st CIRP Conf. on BioManufacturing, Tokyo (2013) 147-151

Study on 2+1 Axis Control Electrical Discharge Machining of 3-dimensional Cross Section’s Changing Hole, Proc. of 16th Int. Conf. on Mechatronics Technology (ICMT2012), Tianjin (2012), CD-ROM, 553-558

Ultraprecision Micromachining of Micro Lens on Roll Mold Die, Proc. of 16th Int. Conf. on Mechatronics Technology (ICMT2012), Tianjin (2012), CD-ROM, 548-552

Microgrooving with Flat-ends for Hard Materials, Proc. of 12th EUSPEN Int. Conf., Stockholm (2012) Vol.2, 96-99

Development of 5-axis Control CAM System for Multi-tasking Machine Tools, Proc. of 45st CIRP Conf. on Manufacturing Systems (CIRP-CMS2012), Athens (2012) 266-270

Microgrooving with Flat-ends for Hard Materials, Proc. of 12th EUSPEN Int. Conf., Stockholm (2012) Vol.2, 96-99

Dexterous Machining of Chain-Shapes by Employing a Multi-Tasking Machine Tool, Proc. of 15th Int. Conf. on Mechatronics Technology (ICMT2011), Melbourne (2011) 59-62

Ultraprecision Microgrooving on Hard Material with Tool Wear Suppression, Proc. of 26th ASPE Annual Meeting. Denver, Colorado, USA (2011) CD-ROM 3293

Development of Conceptual Design Assistance System for Machine Tool Structure with Consideration of Feed Drive Mechanism, Proc. of 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Saitama (2011) No.3288, CD-ROM, 1-4

Efficient Tool Path Generation for Five-Axis Controlled Machining by Use of Square End Mill, Proc. of 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Saitama (2011) No.3282, CD-ROM, 1-4

Precision Complex machining of Glass Lens Mold with Fresnel Shape, Proc. of 11th EUSPEN Int. Conf., Como (2011) Vol.2, 505-508

Creation of Microgroove with Two Flat-ends on Hard-Brittle Materials, Proc. of 6th Int. Conf. on MicroManufacturing (ICoMM), Tokyo (2011) 615-619

Ultraprecision Low-wear Micro Curved Grooving of Hard Material, Proc. of 6th Int. Conf. on MicroManufacturing (ICoMM), Tokyo (2011) 605-609

Precision Machining of Non-axisymmetric Aspheric Glass Lens Mold with Micro Fresnel Structures, Proc. of ASPE Spring Torical Meeting, Charlotte, USA (2011) 24-28

Structure Design of Machine Tool in Consideration with Joint Damping at the Conceptual and Fundamental Stage, Proc. of 14th Int. Conf. on Mechatronics Technology (ICMT2010), Osaka (2010) 253-257

Highly Efficient Cutting of Aspherical Surface of Cemented Carbide by Roational Diamond Tool with New Chamfer, Proc. of 14th Int. Conf. on Mechatronics Technology (ICMT2010), Osaka (2010) 221-225

Development of CAPP/CAM System for Ultraprecision Micromachining -Process Planning for High-Aspect-Ratio Structures-, Proc. of 14th Int. Conf. on Mechatronics Technology (ICMT2010), Osaka (2010) 195-199

Dexterous Machining for a Complicated Shape with Nested Structure, Proc. of 14th Int. Conf. on Mechatronics Technology (ICMT2010), Osaka (2010) 28-31

Dexterous machining of Complicated Shape Consisting of Bended Columns, Proc. of 14th Int. Conf. on Mechatronics Technology (ICMT2010), Osaka (2010) 24-27

Development of Five-axis Machining Center Adopting Table-on-Table Type – New Structure and Baic Characteristics -, Proc. of 14th Int. Conf. on Mechatronics Technology (ICMT2010), Osaka (2010) 17-23

Creation of Microgroove with Two Flat-ends for Hard Material, Proc. of 25th ASPE Annual Meeting, Atlanta, USA (2010) 447-450

Tool Path Generation for 5-Axis Control Machining by Considering Tool Attitude and Attitude Variation, Proc. of 4th CIRP Int. Conf. on High Performance Cutting (HPC), Gifu (2010) 139-144

Comparison of Path Generation Method for Efficient 5-axis Control Drilling of a Large Number of Holes, Proc. of 4th CIRP Int. Conf. on High Performance Cutting (HPC), Gifu (2010) 133-138

Current State of Art and Review in Micro Mechanical Machining, Proc. of Int. Forum on Micro Manufacturing, Gifu (2010) 299-305

Multi-Axis Control Ultraprecision Micromilling, Key Engineering Materials, Vol. 447-448 (2010) 801-805, Proc. of ICoPE/ICPE2010, Singapore

Ultraprecsion Microgrooving of Hard Meterial by Means of Cutting Point Swivel Machining, Key Engineering Materials, Vol. 447-448 (2010) 36-40, Proc. of ICoPE/ICPE2010, Singapore

Development of a Process Planning System for 3+2 Control Rough Milling, Proc. of Int. Symp. on Flexible Automation, Tokyo (2010) CD-ROM (JPL2660) 1-6

Design Assistance for Machine Tool Structure in the Conceptual and Fundamental Stage, Proc. of Int. Symp. on Flexible Automation, Tokyo (2010) CD-ROM (JPL2546) 1-6

Highly Accurate 5-Axis Control Ultraprecision Micromachining by Tool Setting Error Compensation, Proc. of 2nd Int. Conf. on Process Machine Interactions (PMI), Vancouver (2010) CD-ROM 1-8

Rapid Tool Path Generation for 5-Axis Control Machining of Complicated Surfaces, Pro. of 2nd Int. Conf. on Process Machine Interactions (PMI), Vancouver (2010) CD-ROM 1-9

5-Axis Control Ultraprecision Micromilling by Means of a Developed CAPP/CAM System, Proc. of 10th EUSPEN Int. Conf., Delft (2010) Vol.2,65-6

CAM System Development for Multi-tasking Machine Tools, Proc. of 43th CIRP Conf. On Manufacturing Systems, Wien (2010) 1044-1051

Verification of Basic Performance of Size-Reduced Automatic Discharge Gap Controller for Curved Hole Electrical Discharge Machining, Proc. of 16th Int. Symp. on Electromachining, Shanghai (2010) 127-132

Social Activities

International Journal of Precision Engineering and Manufacturing, Springer/KSPE, Co-Editor-in-Chief(2013.9-Present)

International Journal Intelligent Mechatronics and Robotics, IGI Global, Editor(2011.1-Present)

Precision Engineering, Elsevier, Editor-in-Chief (2008.4-Present)

International Journal of Automation Technology, Fuji Tech. Pub., Editor-in-Chief (2007.9-Present)

International Journal of Advanced Manufacturing Technology, Springer, Editor(2001.5-2005.3)

Page Top